View photos of the –truck name here– by clicking on the photos or view a slideshow by clicking on the PicLens link. See the details for this truck below.
no images were found
Details
2010 Ford F750 Daco Brushfighter
Custom built at DACO Fire Equipment in Ft Worth Tx.
13530 Miles
Drivetrain: 300Hp 6.7 Cummins Diesel with Allison 2500 5 speed automatic transmission. Air Brakes. 5.29 axle ratio. After market Merritor 4×4 system installed with Hi/Low options. Factory Spicer rear axle with Merritor transfer case and Merritor front axle. Transfer case is operated with electric air operated silinoids.
*Needs new air solenoid on transfer case for Hi/Low operation. 2×4 and 4×4 operation functioning normal.
Auxiliary motor and pump: 320 GPM Rowe Pump with 3cyl 25hp Kubota Diesel. Auxiliary motor controlled in cab with manual valves on pump manifold. Fuel supply for pump from vehicle main tank. Water manifold from pump is stainless with brass valves. Motor and pump were replaced in 2017. Hour meter for pump shows 262hrs. Pump was replaced without hour meter adjustment at 205hrs. Actual hours on pump motor are approx 60. Scotty 4171 Foam system plumbed directly into pump.
1000 Gallon Poly Tank
Hannay Reel with 100’ 1” hose on rear. Two whip lines in caged bed riding area.
TFT Tornado Remote controlled 500 GPM capable monitor nozzle mounted on front bumper. Control is in cab accessible to driver or passenger.
Whelen LED Lighting package with controller and siren.
Two hard mounted telescoping HID scene lights on bed.
Kussmaul 30 Amp Model 11 battery conditioner.
Fire Com wireless headset communication system with two headsets.
Warn 16.5 ton winch
Kubota Diesel pump – plumbed into trucks fuel tank
1000 gallon water
20 gallons of foam
$95,000
Contact us if you have any question about this truck. Please make a note of the name of this truck to provide to us when you contact us.